תוכן העניינים
The classic model of how free software projects get started was supplied by Eric Raymond, in a now-famous paper on open source processes entitled The Cathedral and the Bazaar. He wrote:
Every good work of software starts by scratching a developer's personal itch.
Note that Raymond wasn't saying that open source projects happen only when some individual gets an itch. Rather, he was saying that good software results when the programmer has a personal interest in seeing the problem solved; the relevance of this to free software was that a personal itch happened to be the most frequent motivation for starting a free software project.
This is still how most free projects are started, but less so now than in 1997, when Raymond wrote those words. Today, we have the phenomenon of organizations—including for-profit corporations—starting large, centrally-managed open source projects from scratch. The lone programmer, banging out some code to solve a local problem and then realizing the result has wider applicability, is still the source of much new free software, but is not the only story.
Raymond's point is still insightful, however. The essential condition is that the producers of the software have a direct interest in its success, because they use it themselves. If the software doesn't do what it's supposed to do, the person or organization producing it will feel the dissatisfaction in their daily work. For example, the OpenAdapter project (http://www.openadapter.org/), which was started by investment bank Dresdner Kleinwort Wasserstein as an open source framework for integrating disparate financial information systems, can hardly be said to scratch any individual programmer's personal itch. It scratches an institutional itch. But that itch arises directly from the experiences of the institution and its partners, and therefore if the project fails to relieve them, they will know. This arrangement produces good software because the feedback loop flows in the right direction. The program isn't being written to be sold to someone else so they can solve their problem. It's being written to solve one's own problem, and then shared with everyone, much as though the problem were a disease and the software were medicine whose distribution is meant to completely eradicate the epidemic.
This chapter is about how to introduce a new free software project to the world, but many of its recommendations would sound familiar to a health organization distributing medicine. The goals are very similar: you want to make it clear what the medicine does, get it into the hands of the right people, and make sure that those who receive it know how to use it. But with software, you also want to entice some of the recipients into joining the ongoing research effort to improve the medicine.
Free software distribution is a twofold task. The software needs to acquire users, and to acquire developers. These two needs are not necessarily in conflict, but they do add some complexity to a project's initial presentation. Some information is useful for both audiences, some is useful only for one or the other. Both kinds of information should subscribe to the principle of scaled presentation; that is, the degree of detail presented at each stage should correspond directly to the amount of time and effort put in by the reader. More effort should always equal more reward. When the two do not correlate tightly, people may quickly lose faith and stop investing effort.
The corollary to this is that appearances matter. Programmers, in particular, often don't like to believe this. Their love of substance over form is almost a point of professional pride. It's no accident that so many programmers exhibit an antipathy for marketing and public relations work, nor that professional graphic designers are often horrified at what programmers come up with on their own.
This is a pity, because there are situations where form is substance, and project presentation is one of them. For example, the very first thing a visitor learns about a project is what its web site looks like. This information is absorbed before any of the actual content on the site is comprehended—before any of the text has been read or links clicked on. However unjust it may be, people cannot stop themselves from forming an immediate first impression. The site's appearance signals whether care was taken in organizing the project's presentation. Humans have extremely sensitive antennae for detecting the investment of care. Most of us can tell in one glance whether a web site was thrown together quickly or was given serious thought. This is the first piece of information your project puts out, and the impression it creates will carry over to the rest of the project by association.
Thus, while much of this chapter talks about the content your project should start out with, remember that its look and feel matter too. Because the project web site has to work for two different types of visitors—users and developers—special attention must be paid to clarity and directedness. Although this is not the place for a general treatise on web design, one principle is important enough to deserve mention, particularly when the site serves multiple (if overlapping) audiences: people should have a rough idea where a link goes before clicking on it. For example, it should be obvious from looking at the links to user documentation that they lead to user documentation, and not to, say, developer documentation. Running a project is partly about supplying information, but it's also about supplying comfort. The mere presence of certain standard offerings, in expected places, reassures users and developers who are deciding whether they want to get involved. It says that this project has its act together, has anticipated the questions people will ask, and has made an effort to answer them in a way that requires minimal exertion on the part of the asker. By giving off this aura of preparedness, the project sends out a message: "Your time will not be wasted if you get involved," which is exactly what people need to hear.
Before starting an open source project, there is one important caveat:
Always look around to see if there's an existing project that does what you want. The chances are pretty good that whatever problem you want solved now, someone else wanted solved before you. If they did solve it, and released their code under a free license, then there's no reason for you to reinvent the wheel today. There are exceptions, of course: if you want to start a project as an educational experience, pre-existing code won't help; or maybe the project you have in mind is so specialized that you know there is zero chance anyone else has done it. But generally, there's no point not looking, and the payoff can be huge. If the usual Internet search engines don't turn up anything, try searching on http://freshmeat.net/ (an open source project news site, about which more will be said later), on http://www.sourceforge.net/, and in the Free Software Foundation's directory of free software at http://directory.fsf.org/.
Even if you don't find exactly what you were looking for, you might find something so close that it makes more sense to join that project and add functionality than to start from scratch yourself.
You've looked around, found that nothing out there really fits your needs, and decided to start a new project.
What now?
The hardest part about launching a free software project is transforming a private vision into a public one. You or your organization may know perfectly well what you want, but expressing that goal comprehensibly to the world is a fair amount of work. It is essential, however, that you take the time to do it. You and the other founders must decide what the project is really about—that is, decide its limitations, what it won't do as well as what it will—and write up a mission statement. This part is usually not too hard, though it can sometimes reveal unspoken assumptions and even disagreements about the nature of the project, which is fine: better to resolve those now than later. The next step is to package up the project for public consumption, and this is, basically, pure drudgery.
What makes it so laborious is that it consists mainly of
organizing and documenting things everyone already
knows—"everyone", that is, who's been involved in the project so
far. Thus, for the people doing the work, there is no immediate
benefit. They do not need a README file giving
an overview of the project, nor a design document or user manual.
They do not need a carefully arranged code tree conforming to the
informal but widespread standards of software source distributions.
Whatever way the source code is arranged is fine for them, because
they're already accustomed to it anyway, and if the code runs at all,
they know how to use it. It doesn't even matter, for them, if the
fundamental architectural assumptions of the project remain
undocumented; they're already familiar with that too.
Newcomers, on the other hand, need these things. Fortunately, they don't need them all at once. It's not necessary for you to provide every possible resource before taking a project public. In a perfect world, perhaps, every new open source project would start out life with a thorough design document, a complete user manual (with special markings for features planned but not yet implemented), beautifully and portably packaged code, capable of running on any computing platform, and so on. In reality, taking care of all these loose ends would be prohibitively time-consuming, and anyway, it's work that one can reasonably hope volunteers will help with once the project is under way.
What is necessary, however, is that enough investment be put into presentation that newcomers can get past the initial obstacle of unfamiliarity. Think of it as the first step in a bootstrapping process, to bring the project to a kind of minimum activation energy. I've heard this threshold called the hacktivation energy: the amount of energy a newcomer must put in before she starts getting something back. The lower a project's hacktivation energy, the better. Your first task is bring the hacktivation energy down to a level that encourages people to get involved.
Each of the following subsections describes one important aspect of starting a new project. They are presented roughly in the order that a new visitor would encounter them, though of course the order in which you actually implement them might be different. You can treat them as a checklist. When starting a project, just go down the list and make sure you've got each item covered, or at least that you're comfortable with the potential consequences if you've left one out.
Put yourself in the shoes of someone who's just heard about your project, perhaps by having stumbled across it while searching for software to solve some problem. The first thing they'll encounter is the project's name.
A good name will not automatically make your project successful, and a bad name will not doom it—well, a really bad name probably could do that, but we start from the assumption that no one here is actively trying to make their project fail. However, a bad name can slow down adoption of the project, either because people don't take it seriously, or because they simply have trouble remembering it.
A good name:
Gives some idea what the project does, or at least is related in an obvious way, such that if one knows the name and knows what the project does, the name will come quickly to mind thereafter.
Is easy to remember. Here, there is no getting around the fact that English has become the default language of the Internet: "easy to remember" means "easy for someone who can read English to remember." Names that are puns dependent on native-speaker pronounciation, for example, will be opaque to the many non-native English readers out there. If the pun is particularly compelling and memorable, it may still be worth it; just keep in mind that many people seeing the name will not hear it in their head the way a native speaker would.
Is not the same as some other project's name, and does not infringe on any trademarks. This is just good manners, as well as good legal sense. You don't want to create identity confusion. It's hard enough to keep track of everything that's available on the Net already, without different things having the same name.
The resources mentioned earlier in הסעיף שנקרא “But First, Look Around” are useful in discovering whether another project already has the name you're thinking of. Free trademark searches are available at http://www.nameprotect.org/ and http://www.uspto.gov/.
If possible, is available as a domain name in the
.com,
.net, and
.org top-level domains. You
should pick one, probably .org,
to advertise as the official home site for the project;
the other two should forward there and are simply to
prevent third parties from creating identity confusion
around the project's name. Even if you intend to host the
project at some other site (see
הסעיף שנקרא “Canned Hosting”), you
can still register project-specific domains and forward
them to the hosting site. It helps users a lot to have a
simple URL to remember.
Once they've found the project's web site, the next thing people will look for is a quick description, a mission statement, so they can decide (within 30 seconds) whether or not they're interested in learning more. This should be prominently placed on the front page, preferably right under the project's name.
The mission statement should be concrete, limiting, and above all, short. Here's an example of a good one, from http://www.openoffice.org/:
To create, as a community, the leading international office suite that will run on all major platforms and provide access to all functionality and data through open-component based APIs and an XML-based file format.
In just a few words, they've hit all the high points, largely by drawing on the reader's prior knowledge. By saying "as a community", they signal that no one corporation will dominate development; "international" means that the software will allow people to work in multiple languages and locales; "all major platforms" means it will be portable to Unix, Macintosh, and Windows. The rest signals that open interfaces and easily understandable file formats are an important part of the goal. They don't come right out and say that they're trying to be a free alternative to Microsoft Office, but most people can probably read between the lines. Although this mission statement looks broad at first glance, in fact it is quite circumscribed: the words "office suite" mean something very concrete to those familiar with such software. Again, the reader's presumed prior knowledge (in this case probably from MS Office) is used to keep the mission statement concise.
The nature of a mission statement depends partly on who is writing it, not just on the software it describes. For example, it makes sense for OpenOffice.org to use the words "as a community", because the project was started, and is still largely sponsored, by Sun Microsystems. By including those words, Sun indicates its sensitivity to worries that it might try to dominate the development process. With this sort of thing, merely demonstrating awareness of the potential for a problem goes a long way toward avoiding the problem entirely. On the other hand, projects that aren't sponsored by a single corporation probably don't need such language; after all, development by community is the norm, so there would ordinarily be no reason to list it as part of the mission.
Those who remain interested after reading the mission statement will next want to see more details, perhaps some user or developer documentation, and eventually will want to download something. But before any of that, they'll need to be sure it's open source.
The front page must make it unambiguously clear that the project is open source. This may seem obvious, but you would be surprised how many projects forget to do it. I have seen free software project web sites where the front page not only did not say which particular free license the software was distributed under, but did not even state outright that the software was free at all. Sometimes the crucial bit of information was relegated to the Downloads page, or the Developers page, or some other place that required one more mouse click to get to. In extreme cases, the license was not given anywhere on the web site at all—the only way to find it was to download the software and look inside.
Don't make this mistake. Such an omission can lose many potential developers and users. State up front, right below the mission statement, that the project is "free software" or "open source software", and give the exact license. A quick guide to choosing a license is given in הסעיף שנקרא “Choosing a License and Applying It” later in this chapter, and licensing issues are discussed in detail in פרק 9, Licenses, Copyrights, and Patents.
At this point, our hypothetical visitor has determined—probably in a minute or less—that she's interested in spending, say, at least five more minutes investigating this project. The next sections describe what she should encounter in that five minutes.
There should be a brief list of the features the software supports (if something isn't completed yet, you can still list it, but put "planned" or "in progress" next to it), and the kind of computing environment required to run the software. Think of the features/requirements list as what you would give to someone asking for a quick summary of the software. It is often just a logical expansion of the mission statement. For example, the mission statement might say:
To create a full-text indexer and search engine with a rich API, for use by programmers in providing search services for large collections of text files.
The features and requirements list would give the details, clarifying the mission statement's scope:
Features:
Searches plain text, HTML, and XML
Word or phrase searching
(planned) Fuzzy matching
(planned) Incremental updating of indexes
(planned) Indexing of remote web sites
Requirements:
Python 2.2 or higher
Enough disk space to hold the indexes (approximately 2x original data size)
With this information, readers can quickly get a feel for whether this software has any hope of working for them, and they can consider getting involved as developers too.
People always want to know how a project is doing. For new projects, they want to know the gap between the project's promise and current reality. For mature projects, they want to know how actively it is maintained, how often it puts out new releases, how responsive it is likely to be to bug reports, etc.
To answer these questions, you should provide a development status page, listing the project's near-term goals and needs (for example, it might be looking for developers with a particular kind of expertise). The page can also give a history of past releases, with feature lists, so visitors can get an idea of how the project defines "progress" and how quickly it makes progress according to that definition.
Don't be afraid of looking unready, and don't give in to the temptation to hype the development status. Everyone knows that software evolves by stages; there's no shame in saying "This is alpha software with known bugs. It runs, and works at least some of the time, but use at your own risk." Such language won't scare away the kinds of developers you need at that stage. As for users, one of the worst things a project can do is attract users before the software is ready for them. A reputation for instability or bugginess is very hard to shake, once acquired. Conservativism pays off in the long run; it's always better for the software to be more stable than the user expected than less, and pleasant surprises produce the best kind of word-of-mouth.
The software should be downloadable as source code in standard formats. When a project is first getting started, binary (executable) packages are not necessary, unless the software has such complicated build requirements or dependencies that merely getting it to run would be a lot of work for most people. (But if this is the case, the project is going to have a hard time attracting developers anyway!)
The distribution mechanism should be as convenient, standard, and low-overhead as possible. If you were trying to eradicate a disease, you wouldn't distribute the medicine in such a way that it requires a non-standard syringe size to administer. Likewise, software should conform to standard build and installation methods; the more it deviates from the standards, the more potential users and developers will give up and go away confused.
That sounds obvious, but many projects don't bother to standardize their installation procedures until very late in the game, telling themselves they can do it any time: "We'll sort all that stuff out when the code is closer to being ready." What they don't realize is that by putting off the boring work of finishing the build and installation procedures, they are actually making the code take longer to get ready—because they discourage developers who might otherwise have contributed to the code. Most insidiously, they don't know they're losing all those developers, because the process is an accumulation of non-events: someone visits a web site, downloads the software, tries to build it, fails, gives up and goes away. Who will ever know it happened, except the person themselves? No one working on the project will realize that someone's interest and good will have been silently squandered.
Boring work with a high payoff should always be done early, and significantly lowering the project's barrier to entry through good packaging brings a very high payoff.
When you release a downloadable package, it is vital that you give a unique version number to the release, so that people can compare any two releases and know which supersedes the other. A detailed discussion of version numbering can be found in הסעיף שנקרא “Release Numbering”, and the details of standardizing build and installation procedures are covered in הסעיף שנקרא “Packaging”, both in פרק 7, Packaging, Releasing, and Daily Development.
Downloading source packages is fine for those who just want to install and use the software, but it's not enough for those who want to debug or add new features. Nightly source snapshots can help, but they're still not fine-grained enough for a thriving development community. People need real-time access to the latest sources, and the way to give them that is to use a version control system. The presence of anonymously accessible version controlled sources is a sign—to both users and developers—that this project is making an effort to give people what they need to participate. If you can't offer version control right away, then put up a sign saying you intend to set it up soon. Version control infrastructure is discussed in detail in הסעיף שנקרא “Version Control” in פרק 3, Technical Infrastructure.
The same goes for the project's bug tracker. The importance of a bug tracking system lies not only in its usefulness to developers, but in what it signifies for project observers. For many people, an accessible bug database is one of the strongest signs that a project should be taken seriously. Furthermore, the higher the number of bugs in the database, the better the project looks. This might seem counterintuitive, but remember that the number of bugs recorded really depends on three things: the absolute number of bugs present in the software, the number of users using the software, and the convenience with which those users can register new bugs. Of these three factors, the latter two are more significant than the first. Any software of sufficient size and complexity has an essentially arbitrary number of bugs waiting to be discovered. The real question is, how well will the project do at recording and prioritizing those bugs? A project with a large and well-maintained bug database (meaning bugs are responded to promptly, duplicate bugs are unified, etc.) therefore makes a better impression than a project with no bug database, or a nearly empty database.
Of course, if your project is just getting started, then the bug database will contain very few bugs, and there's not much you can do about that. But if the status page emphasizes the project's youth, and if people looking at the bug database can see that most filings have taken place recently, they can extrapolate from that that the project still has a healthy rate of filings, and they will not be unduly alarmed by the low absolute number of bugs recorded.
Note that bug trackers are often used to track not only software bugs, but enhancement requests, documentation changes, pending tasks, and more. The details of running a bug tracker are covered in הסעיף שנקרא “Bug Tracker” in פרק 3, Technical Infrastructure, so I won't go into them here. The important thing from a presentation point of view is just to have a bug tracker, and to make sure that fact is visible from the front page of the project.
Visitors usually want to know how to reach the human beings involved with the project. Provide the addresses of mailing lists, chat rooms, and IRC channels, and any other forums where others involved with the software can be reached. Make it clear that you and the other authors of the project are subscribed to these mailing lists, so people see there's a way to give feedback that will reach the developers. Your presence on the lists does not imply a committment to answer all questions or implement all feature requests. In the long run, most users will probably never join the forums anyway, but they will be comforted to know that they could if they ever needed to.
In the early stages of a project, there's no need to have separate user and developer forums. It's much better to have everyone involved with the software talking together, in one "room." Among early adopters, the distinction between developer and user is often fuzzy; to the extent that the distinction can be made, the ratio of developers to users is usually much higher in the early days of the project than later on. While you can't assume that every early adopter is a programmer who wants to hack on the software, you can assume that they are at least interested in following development discussions and in getting a sense of the project's direction.
As this chapter is only about getting a project started, it's enough merely to say that these communications forums need to exist. Later, in הסעיף שנקרא “Handling Growth” in פרק 6, Communications, we'll examine where and how to set up such forums, the ways in which they might need moderation or other management, and how to separate user forums from developer forums, when the time comes, without creating an unbridgeable gulf.
If someone is considering contributing to the project, she'll look for developer guidelines. Developer guidelines are not so much technical as social: they explain how the developers interact with each other and with the users, and ultimately how things get done.
This topic is covered in detail in הסעיף שנקרא “Writing It All Down” in פרק 4, Social and Political Infrastructure, but the basic elements of developer guidelines are:
pointers to forums for interaction with other developers
instructions on how to report bugs and submit patches
some indication of how development is usually done—is the project a benevolent dictatorship, a democracy, or something else
No pejorative sense is intended by "dictatorship", by the way. It's perfectly okay to run a tyranny where one particular developer has veto power over all changes. Many successful projects work this way. The important thing is that the project come right out and say so. A tyranny pretending to be a democracy will turn people off; a tyranny that says it's a tyranny will do fine as long as the tyrant is competent and trusted.
See http://subversion.apache.org/docs/community-guide/ for an example of particularly thorough developer guidelines, or http://www.openoffice.org/dev_docs/guidelines.html for broader guidelines that focus more on governance and the spirit of participation and less on technical matters.
The separate issue of providing a programmer's introduction to the software is discussed in הסעיף שנקרא “Developer documentation” later in this chapter.
Documentation is essential. There needs to be something for people to read, even if it's rudimentary and incomplete. This falls squarely into the "drudgery" category referred to earlier, and is often the first area where a new open source projects falls down. Coming up with a mission statement and feature list, choosing a license, summarizing development status—these are all relatively small tasks, which can be definitively completed and usually need not be returned to once done. Documentation, on the other hand, is never really finished, which may be one reason people sometimes delay starting it at all.
The most insidious thing is that documentation's utility to those writing it is the reverse of its utility to those who will read it. The most important documentation for initial users is the basics: how to quickly set up the software, an overview of how it works, perhaps some guides to doing common tasks. Yet these are exactly the things the writers of the documentation know all too well—so well that it can be difficult for them to see things from the reader's point of view, and to laboriously spell out the steps that (to the writers) seem so obvious as to be unworthy of mention.
There's no magic solution to this problem. Someone just needs to sit down and write the stuff, and then run it by typical new users to test its quality. Use a simple, easy-to-edit format such as HTML, plain text, Texinfo, or some variant of XML—something that's convenient for lightweight, quick improvements on the spur of the moment. This is not only to remove any overhead that might impede the original writers from making incremental improvements, but also for those who join the project later and want to work on the documentation.
One way to ensure basic initial documentation gets done is to limit its scope in advance. That way, writing it at least won't feel like an open-ended task. A good rule of thumb is that it should meet the following minimal criteria:
Tell the reader clearly how much technical expertise they're expected to have.
Describe clearly and thoroughly how to set up the software, and somewhere near the beginning of the documentation, tell the user how to run some sort of diagnostic test or simple command to confirm that they've set things up correctly. Startup documentation is in some ways more important than actual usage documentation. The more effort someone has invested in installing and getting started with the software, the more persistent she'll be in figuring out advanced functionality that's not well-documented. When people abandon, they abandon early; therefore, it's the earliest stages, like installation, that need the most support.
Give one tutorial-style example of how to do a common task. Obviously, many examples for many tasks would be even better, but if time is limited, pick one task and walk through it thoroughly. Once someone sees that the software can be used for one thing, they'll start to explore what else it can do on their own—and, if you're lucky, start filling in the documentation themselves. Which brings us to the next point...
Label the areas where the documentation is known to be incomplete. By showing the readers that you are aware of its deficiencies, you align yourself with their point of view. Your empathy reassures them that they don't face a struggle to convince the project of what's important. These labels needn't represent promises to fill in the gaps by any particular date —it's equally legitimate to treat them as open requests for volunteer help.
The last point is of wider importance, actually, and can be applied to the entire project, not just the documentation. An accurate accounting of known deficiencies is the norm in the open source world. You don't have to exaggerate the project's shortcomings, just identify them scrupulously and dispassionately when the context calls for it (whether in the documentation, in the bug tracking database, or on a mailing list discussion). No one will treat this as defeatism on the part of the project, nor as a commitment to solve the problems by a certain date, unless the project makes such a commitment explicitly. Since anyone who uses the software will discover the deficiencies for themselves, it's much better for them to be psychologically prepared—then the project will look like it has a solid knowledge of how it's doing.
Documentation should be available from two places: online (directly from the web site), and in the downloadable distribution of the software (see הסעיף שנקרא “Packaging” in פרק 7, Packaging, Releasing, and Daily Development). It needs to be online, in browsable form, because people often read documentation before downloading software for the first time, as a way of helping them decide whether to download at all. But it should also accompany the software, on the principle that downloading should supply (i.e., make locally accessible) everything one needs to use the package.
For online documentation, make sure that there is a link that brings up the entire documentation in one HTML page (put a note like "monolithic" or "all-in-one" or "single large page" next to the link, so people know that it might take a while to load). This is useful because people often want to search for a specific word or phrase across the entire documentation. Generally, they already know what they're looking for; they just can't remember what section it's in. For such people, nothing is more frustrating than encountering one HTML page for the table of contents, then a different page for the introduction, then a different page for installation instructions, etc. When the pages are broken up like that, their browser's search function is useless. The separate-page style is useful for those who already know what section they need, or who want to read the entire documentation from front to back in sequence. But this is not the most common way documentation is accessed. Far more often, someone who is basically familiar with the software is coming back to search for a specific word or phrase. To fail to provide them with a single, searchable document would only make their lives harder.
Developer documentation is written to help programmers understand the code, so they can repair and extend it. This is somewhat different from the developer guidelines discussed earlier, which are more social than technical. Developer guidelines tell programmers how to get along with each other; developer documentation tells them how to get along with the code itself. The two are often packaged together in one document for convenience (as with the http://subversion.apache.org/docs/community-guide/ example given earlier), but they don't have to be.
Although developer documentation can be very helpful, there's no reason to delay a release to do it. As long as the original authors are available (and willing) to answer questions about the code, that's enough to start with. In fact, having to answer the same questions over and over is a common motivation for writing documentation. But even before it's written, determined contributors will still manage to find their way around the code. The force that drives people to spend time learning a code base is that the code does something useful for them. If people have faith in that, they will take the time to figure things out; if they don't have that faith, no amount of developer documentation will get or keep them.
So if you have time to write documentation for only one audience, write it for users. All user documentation is, in effect, developer documentation as well; any programmer who's going to work on a piece of software will need to be familiar with how to use it. Later, when you see programmers asking the same questions over and over, take the time to write up some separate documents just for them.
Some projects use wikis for their initial documentation, or even as their primary documentation. In my experience, this really only works if the wiki is actively edited by a few people who agree on how the documentation is to be organized and what sort of "voice" it should have. See הסעיף שנקרא “Wikis” in פרק 3, Technical Infrastructure for more.
If the project involves a graphical user interface, or if it produces graphical or otherwise distinctive output, put some samples up on the project web site. In the case of interface, this means screenshots; for output, it might be screenshots or just files. Both cater to people's need for instant gratification: a single screenshot can be more convincing than paragraphs of descriptive text and mailing list chatter, because a screenshot is inarguable proof that the software works. It may be buggy, it may be hard to install, it may be incompletely documented, but that screenshot is still proof that if one puts in enough effort, one can get it to run.
There are many other things you could put on the project web site, if you have the time, or if for one reason or another they are especially appropriate: a news page, a project history page, a related links page, a site-search feature, a donations link, etc. None of these are necessities at startup time, but keep them in mind for the future.
There are a few sites that provide free hosting and infrastructure for open source projects: a web area, version control, a bug tracker, a download area, chat forums, regular backups, etc. The details vary from site to site, but the same basic services are offered at all of them. By using one of these sites, you get a lot for free; what you give up, obviously, is fine-grained control over the user experience. The hosting service decides what software the site runs, and may control or at least influence the look and feel of the project's web pages.
See הסעיף שנקרא “Canned Hosting” in פרק 3, Technical Infrastructure for a more detailed discussion of the advantages and disadvantages of canned hosting, and a list of sites that offer it.